The Lind GE2050-4256 DC/DC Power Adapter is designed to power your Getac PC and to charge its internal battery from a 12-32 VDC power source.
– 12-32 VDC
– Cig. Plug 72″ Input Cable
– 5.5×2.5 36″ Output Cable
The Lind GE1963-2654 DC/DC Power Adapter provides a regulated DC output to power Getac-compatible laptops and peripherals from a 12-32 VDC power source. The adapter supplies current and voltage levels as required by the laptop.
– Cig. Plug 36″ Input Cable
– Kycon 4 pin Output Cable
– Low Input Voltage Disconnect
– High Input Voltage Disconnect
– Output Short Circuit Protection
– Output Overcurrent Protection
– Internal Over Temperature Protection
The Lind GE1950-4319 DC/DC Power Adapter is designed to power your Getac-compatible laptop computer and to charge its internal battery from an 12-32 VDC power source. The adapter supplies current and voltage levels as required by the laptop.
– Cig. Plug 72″ Input Cable
– 5.5×2.5 72″ Output Cable
– Low Input Voltage Disconnect
– High Input Voltage Disconnect
– Output Short Circuit Protection
– Output Overcurrent Protection
– Internal Over Temperature Protection
The Lind GE1950-4118 DC/DC Power Adapter is designed to power your Getac-compatible laptop computer and to charge its internal battery from an 12-32 VDC power source. The adapter supplies current and voltage levels as required by the laptop.
– Bare Wire 36″ Input Cable
– 5.5×2.5 36″ Output Cable
– Low Input Voltage Disconnect
– High Input Voltage Disconnect
– Output Short Circuit Protection
– Output Overcurrent Protection
– Internal Over Temperature Protection
The Lind GE1950-3964 DC/DC Power Adapter is designed to power your Getac-compatible laptop computer and to charge its internal battery from an 12-16 VDC power source. The adapter supplies current and voltage levels as required by the laptop.
– Bare Wire 36″ Input Cable
– 5.5×2.5 36″ Output Cable
– Low Input Voltage Disconnect
– High Input Voltage Disconnect
– Output Short Circuit Protection
– Output Overcurrent Protection
– Internal Over Temperature Protection
The Lind GE1935-3941 DC/DC Power Adapter is designed to power your Getac-compatible laptop computer and to charge its internal battery from an 11-16 VDC power source. The adapter supplies current and voltage levels as required by the laptop.
– Bare Wire 36″ Input Cable
– 5.5×2.5 36″ Output Cable
– Low Input Voltage Disconnect
– High Input Voltage Disconnect
– Output Short Circuit Protection
– Output Overcurrent Protection
– Internal Over Temperature Protection
The Lind GE1935-3914 DC/DC Power Adapter is designed to power your Getac-compatible laptop computer and to charge its internal battery from an 12-32 VDC power source. The adapter supplies current and voltage levels as required by the laptop.
– Cig. Plug 36″ Input Cable
– 5.5×2.5 36″ Output Cable
– Low Input Voltage Disconnect
– High Input Voltage Disconnect
– Output Short Circuit Protection
– Output Overcurrent Protection
– Internal Over Temperature Protection
The Lind GE19-19-3848 DC/DC Power Adapter is designed to power your Getac PC and to charge its internal battery from an 11-16 VDC power source.
– HP OfficeJet 100 Compatibility
– 11-16 VDC
– Cig. Plug 36″ Input Cable
– 5.5×2.5 37″ Output Cable
– Bondi 65W 36″ Output Cable
The DC Laptop Power Adapter adjusts the output voltage to the correct operating voltage and amperage requirement for this series of laptops. This adapter has been designed and built to meet electrical and environmental standards of MIL-STD461F, MIL-STD1275D, and MIL-STD810G.
– 11-32 VDC
– Bare Wire 72″ Input Cable
– 5.5×2.5 78″ Output Cable
– Full continuous rated power output.
– Low Input Voltage Shut Down.
– High Input Voltage Shut Down.
– Automatic Shut Down Reset.
– Adapters are housed in rugged Aluminum cases & epoxy encapsulated to resist shock and moisture.
– Flanged ends for easy mount installation.
– Can be powered via NATO Slave, BA5590, cigarette lighter connectors or customized.
– Independent laboratory testing has been done on the adapter regarding these standards and the testing results are available upon request.
The DC Laptop Power Adapter adjusts the output voltage to the correct operating voltage and amperage requirement for this series of laptops. This adapter has been designed and built to meet electrical and environmental standards of MIL-STD461F, MIL-STD1275D, and MIL-STD810G.
– 11-32 VDC
– Bare Wire 72″ Input Cable
– Kycon 4 pin 36″ Output Cable
– Full continuous rated power output.
– Low Input Voltage Shut Down.
– High Input Voltage Shut Down.
– Automatic Shut Down Reset.
– Adapters are housed in rugged Aluminum cases & epoxy encapsulated to resist shock and moisture.
– Flanged ends for easy mount installation.
– Can be powered via NATO Slave, BA5590, cigarette lighter connectors or customized.
– Independent laboratory testing has been done on the adapter regarding these standards and the testing results are available upon request.
Drag & Drop Website Builder